News Center | Boli Automation

News

NEWS & INFORMATION

industry cases and newsINDUSTRY CASES & NEWS

Bolli hopes to provide you with valuable information in a short time

This article explains the composition and setting logic of vision dispensing machine dispensing process parameters, explaining how parameters such as dispensing pressure, movement speed, temperature, and pressure-holding time affect the glue shape and efficiency, and lays out debugging ideas.

How to set vision dispensing machine dispensing process parameters
This article explains the types and manifestations of common vision dispensing machine dispensing defects, laying out the analysis ideas and improvement directions for problems such as misalignment, glue break, overflow, and stringing, and explaining the systematic troubleshooting sequence.

How to analyze and improve vision dispensing machine dispensing defects
This article explains how vision dispensing machine should classify, temporarily store, and compliantly dispose of the waste adhesive and cleaning waste liquid generated during adhesive change, glue cleaning, and pipeline flushing, helping enterprises do well in environmental protection and site management.

How to handle vision dispensing machine waste adhesive and cleaning waste liquid
vision dispensing machine adhesive compatibility must be inferred backward from form, viscosity, and curing method to the valve body and pipeline, and verified with on-machine sample testing. This article clearly explains the key steps to judge compatibility.

How to judge adhesive compatibility of a vision dispensing machine?
the core of vision dispensing machine motion control is the coordination of servo drive and screw transmission: the servo governs precision, the screw governs displacement, with Vision closed-loop compensation. This article clearly explains selection and sample testing points.

How do the servo and screw of a vision dispensing machine coordinate?
How to choose a vision dispensing machine? Bolli Automation compares from three dimensions: granite platform precision, inline capacity, desktop machine flexibility, and with industry selection checklist and suggestions, helps you directly determine the solution at the source factory.

How to choose a vision dispensing machine: granite, inline, or desktop?
Break down the four-segment composition of vision dispensing machine single-piece takt, clearly explain the impact of stroke, camera, valve body and trajectory on capacity and speed-up methods, with example of calculating capacity from eight-second takt and sample testing suggestions

How many points can one vision dispensing machine make in an hour?
Explaining the metering principle of two-liquid valve for two-component dispensing of vision dispensing machine, the role of static mixing tube, the causes of ratio drift and online process key points, with Bolli free sample testing parameter confirmation suggestions.

How does a vision dispensing machine dispense two-component adhesive?
Vision dispensing machine air source is a hidden foundation: containing water and oil causes dispensing drift and clog valve, rely on dry multi-stage filtration and automatic drainage to treat the root cause; use nearby pressure reduction, pressure stabilizer tank and proportional valve to shave peaks for pressure fluctuation. Bolli equipment is designed for 600~1200 hpa.

How to manage the compressed air of a vision dispensing machine?
How to pair vision dispensing machine adhesive and adhesive valve? Bolli Automation details how adhesive viscosity, filler and curing method determine valve type (screw valve/metering valve/jetting valve), and the matching key points of feeding pressure and needle caliber, helping you select without pitfalls.

How to pair the adhesive and dispensing valve of a vision dispensing machine?
Vision dispensing machine changeover speed-up and error-proofing for multiple product types: program templating, parameter recipes, quick fixture change, Vision recognition, Bolli equipment with multiple program recipes and free sample testing.

How to change lines quickly and accurately for multiple product types on a vision dispensing machine?
Vision system maintenance does four things: check imaging, check light source, check fixing, check cables. Use special lens paper or air blower for the lens, blow first then wipe; after cleaning, re-confirm the recognition effect; if focus or camera position has been moved, recalibrate.

how to maintain the vision dispensing machine Vision system?

loading…

You have reached the last piece of content!

Product Center

Single-Y Dual-Station Panoramic Vision Dispensing Machine

Vision-following dispensingmachine

VisionFour-axis rotary dispensing machine

dual-Y panoramic vision dispensing machine

Learn more

News

industry cases and newsINDUSTRY CASES & NEWS

How to set vision dispensing machine dispensing process parameters

How to analyze and improve vision dispensing machine dispensing defects

How to handle vision dispensing machine waste adhesive and cleaning waste liquid

How to judge adhesive compatibility of a vision dispensing machine?

How do the servo and screw of a vision dispensing machine coordinate?

How to choose a vision dispensing machine: granite, inline, or desktop?

How many points can one vision dispensing machine make in an hour?

How does a vision dispensing machine dispense two-component adhesive?

How to manage the compressed air of a vision dispensing machine?

How to pair the adhesive and dispensing valve of a vision dispensing machine?

How to change lines quickly and accurately for multiple product types on a vision dispensing machine?

how to maintain the vision dispensing machine Vision system?

Product Center

Single-Y Dual-Station Panoramic Vision Dispensing Machine

Vision-following dispensingmachine

VisionFour-axis rotary dispensing machine

dual-Y panoramic vision dispensing machine

Search

Social Media

About Us

Professionalfields

Professionalteam