is precision sufficient, is performance stable

Vision systems are sensitive to ambient light. Boli machines carryself-developed lighting and shading hoodsand work stably under ordinary workshop lighting, but avoid direct sunlight on the work zone. If a ceiling lamp sits right above, fit a shade and adjust the angle. Cleanliness: no cleanroom is required, but keep the work area clean — dust on the lens degrades recognition; dust in the adhesive degrades dispensing. Wipe the table and camera-lens area with a lint-free cloth weekly.

Site requirements for a vision dispensing machine boil down to five words: '

flat, dry, stable power, shaded, cleanIndustry Solutions。

PCBs, connectors, coils'. A single station takes about 2-3m² with surrounding access space. Floor flatness directly affects precision; temperature, humidity and lighting affect vision stability. Power needs a dedicated breaker and ground; the air interface stays close to the machine. Planning interfaces early avoids rework later. Learn more

/ What Products Can a Vision Dispensing Machine Handle?Many buyers are unsure whether their product suits a vision dispensing machine. This article covers the scope clearly:

New Energyindustry coverage, size range, irregular-part solutions and unsuitable scenarios

.1. Six Industries Covered

screws, nuts, boltsVision dispensing machines cover dozens of products across six industries: Learn more

catheter fittings, syringes— phone mid-frame sealing, Type-C port encapsulation, PCB red adhesive, FPC reinforcement, camera-module dispensing;

Semiconductors

— chip underfill, wafer-level packaging, BGA ball placement;

New Energy

— battery module thermal-conductive adhesive, cell sealing;Difference Between 4-Axis and 3-Axis。

Automotive Electronics

— lamp sealing, sensor potting, ECU encapsulation;production line automation。

Hardware

— screw thread coating, bearing oiling;

Medical— catheter fitting sealing, syringe piston coating.

2. Product Size RangeProduct size is bounded by XY travel. Boli machines handle parts from 2×2mm micro components up to 900×400mm. Beyond single-machine travel, add a conveyor for segmented dispensing.

3. Irregular and Curved ProductsIrregular and curved parts are handled with the right configuration. Flat irregular parts run on a standard 3-axis vision machine — the camera recognizes outlines and feature points automatically. 3D curved parts need optional laser height sensing or Z-following; the Boli BL-ZS561 and BL-ZQ561 support automatic height tracking. Cylindrical parts need a 4-axis rotary model whose R axis turns 360° for circumferential dispensing. Learn more

4. The Small-Batch, High-Variety AdvantageMulti-variety, small-batch production is where vision dispensing shines. Program each product once; at changeover, load the program, place the part, press start — 5-10 minutes total. No fixture swaps or coordinate recalibration like traditional machines. A factory running 10 products needs 10 fixture sets and 1-3 hours per changeover on a conventional dispenser; a vision machine needs no fixtures at all — programs switch in one click. Learn more

6. Summary

5. Unsuitable Scenarios