/ What Factors Affect a Vision Dispensing Machine's Dispensing Precision?
— automation removes human error, lifting yield from 90-95% to above 98%
Capacity growth— doubled or 3-5x capacity means you can take more ordersYou don't need to buy the most expensive equipment on day one. Match your current output, pick the right starting point, and leave room to upgrade — that is the key.Is Automation Suitable for Small-Batch, High-Variety Factories?Yes, but the direction differs. High-volume plants chase 'non-stop continuous production'; small-batch high-variety plants chase 'fast changeover, minimal downtime'. Boli's approach: one-click program switching via the vision system plus universal fixture design. Even 5-6 product changes a day won't blow up changeover time because of automation. Learn morevision dispensing machine selection1. Floor Area and Space: One Size Bigger Than the MachineThe machine itself is compact — Boli BL standard models measure about 600×700mm — but installation requires。
reserved operating and maintenance space
around it. Allow at least 800mm in front for the operator, 500mm each side for opening access doors, and 300mm behind forwiring and heat dissipation. Adding thecompressor and air tank。
, a standard dispensing station occupies about 2-3m². For multiple machines side by side, keep 600mm+ between units so workspaces don't interfere. Learn more
air compressor2. Floor and Environment: Flat, Dry, No Strong Vibration
A vision dispensing machine is precision equipment with floor-flatness requirements. The four corners have adjustable leveling feet; calibrate with a spirit level so the table is level within 0.05mm/m. An uneven floor causes resonance during motion and directly hurts dispensing precision. Keep workshop temperature at 15-35°C and humidity 30%-70%RH.
Excessive heat shifts adhesive viscosity and output; high humidity condenses on lenses and impairs vision recognition. Keep the machine away from punch presses and injection molders; where unavoidable, add vibration-damping pads. Learn morenoise standard
5. Summary
3. Power and Air: Plan Interfaces EarlyElectrically, a Boli BL machine draws about 1-1.5kW on 220V single phase, needing a dedicated breaker and ground. Plant voltage fluctuation beyond ±10% destabilizes servo drives — add a stabilizer. The air interface should be near the machine with hose runs under 5 meters to avoid pressure droop. Reserve at least 2 outlets per station forthe machine, industrial PC and monitor, plus a network port for equipment networking and data collection.— connect power and air; confirm the machine self-checks and all axes home. Only then proceed to formal acceptance. Learn more。